Independent Guide — Tesla Wall Connector

Tesla Wall Connector Installation in Cornwall

What it takes to get a Tesla Wall Connector Gen 3 fitted in Cornwall: 7kW single-phase or 22kW three-phase, costs, and how to keep the Tesla warranty intact.

Ask for an Introduction

Step 1 of 3 — What do you need?

We’re an independent guide still building our list of Cornish installers, so we may not have one for your area yet. Your confirmation email explains the other options in the meantime.

Independent Guide, Not an Installer
OZEV Grant Rules Explained
Covering All Cornwall
Zappi, Easee, Ohme, Pod Point, Tesla Compared

Tesla Wall Connector installation across Cornwall

The Tesla Wall Connector (Gen 3) is one of the best-built domestic EV chargers on the market — purpose-engineered for Tesla vehicles, with native integration to the Tesla app for charge scheduling, kWh history and cost tracking. It works fine with non-Tesla EVs via the Type 2 connector too, but the Tesla integration is what makes it the natural choice for Model 3/Y/S/X owners.

Wall Connector key specs:

  • Up to 11.5kW single-phase (48A) or 22kW three-phase (32A) — most UK domestic installs are 7.4kW (32A single-phase, the standard UK supply ceiling for EV chargers on a typical 100A main fuse)
  • Native Tesla app integration (charge schedule, cost tracking, vehicle wake)
  • 7.3m tethered Type 2 cable (or 2.4m for the shorter variant)
  • WiFi connected, OTA firmware updates from Tesla
  • IP55 rated — suitable for outdoor installation including coastal Cornwall
  • Up to 4 chargers can share a single supply via internal load balancing (no extra hardware needed)

Typical Cornwall install (2026):

  • Hardware: £450-£500 (Tesla direct pricing)
  • Installation: £500-£900 depending on cable run and earthing requirements
  • All-in 7kW domestic install: typically £950-£1,400
  • Long cable run (15m+): add £8-£15/m
  • Three-phase 22kW: add £400-£800 depending on existing supply

Important: Use a Tesla-recommended electrician or at minimum an OZEV-approved installer familiar with Wall Connector commissioning — Tesla has specific earthing and RCD requirements (Type A RCD with 6mA DC fault detection, or Type B RCD; PEN fault detection where on a TN-C-S supply) that some installers miss. Done right, the unit carries a 4-year Tesla warranty; done wrong, the warranty is void.

The Tesla Wall Connector is compatible with Octopus Intelligent Go via direct Tesla API integration — the vehicle itself controls charge timing, so the charger doesn't need to be in Octopus's compatibility list. This makes it one of the most flexible smart-tariff options for Tesla owners.

Three Ways to Get a Charger Fitted

We’re an independent guide, not an installer. These are the honest options; pick whichever suits your job.

1

Book a National Installer Online

Companies such as Pod Energy (formerly Pod Point) sell the charger and installation together online at a fixed price, with installers covering Cornwall. Simple for a standard driveway install.

See Pod Energy’s home charger →
Affiliate link: we may earn a commission if you buy, at no extra cost to you.

2

Hire a Local OZEV-Approved Electrician

A local electrician is often the better choice for trickier jobs: long cable runs, older supplies, three-phase, or holiday lets. If you’re claiming a grant, check they’re on the official list.

Search the government’s authorised installer list →

3

Ask Us for an Introduction

Leave your details and we’ll try to introduce you to one local installer covering your postcode. We’re still building our list, so we can’t promise one yet. Your confirmation email names the installer we pass your details to, and installers may pay us for introductions.

Ask for an introduction →

All Cornwall EV Charger Installation Services

Need something other than Tesla Wall Connector installation? We cover the full range of EV charger Cornwall work — home, workplace, holiday-let, smart, Tesla Wall Connector and OZEV grant installs.

Transparent Tesla Wall Connector Installation Pricing, No Surprises

Prices vary with cable run, consumer-unit work, and supply type. Quotes given before any work starts.

Home Install (7kW)

from
£800

Standard single-socket 7kW domestic install fitted. £300 net of OZEV grant where eligible.

Smart Charger Install

from
£1,000

Zappi, Easee, Ohme or Pod Point fitted. Solar diversion and Octopus Intelligent Go ready.

Tesla Wall Connector

from
£850

Gen 3 charger plus install. On OZEV's eligible chargepoint list for residential grants; the grant depends on your own eligibility.

Three-Phase 22kW

from
£1,800

Where the MPAN supply allows three-phase. Workplace and high-turnover holiday lets — bespoke quote.

Tesla Wall Connector Installation Across Cornwall

Find your nearest town guide for local costs, supply quirks and what to expect.

Tesla Wall Connector Installation FAQs

Everything you need to know about Tesla Wall Connector installation in Cornwall.

All-in for a standard 7kW (32A single-phase) install: £950-£1,400. Hardware is £450-£500 from Tesla direct; installation labour adds £500-£900 depending on cable run, consumer-unit work, and earthing requirements. Three-phase 22kW installs add £400-£800.

Yes — it has a standard Type 2 connector and charges any modern EV. You lose the Tesla app integration (charge scheduling via the car) but charging itself works the same. Many households with a Tesla + a non-Tesla second EV install a Wall Connector and use it for both.

Yes, via direct Tesla-Octopus API integration — the vehicle itself controls charge timing, so the Wall Connector doesn't need to appear in Octopus's compatibility list. This is one of the most reliable smart-tariff setups for Tesla owners. Off-peak rate is around 5.5p/kWh at time of writing.

Tesla has specific earthing and RCD requirements for Wall Connector installs (Type A + 6mA DC fault detection, or Type B; PEN fault detection on TN-C-S supplies) that some general electricians miss. Done correctly, the 4-year Tesla warranty is preserved. Done incorrectly, the warranty is void and you're on your own if the unit fails. Ask any installer about their Wall Connector commissioning experience.

Yes — up to 4 Wall Connectors can share a single supply via the built-in load balancing feature (no external CT clamp or extra hardware needed). The chargers communicate over WiFi to share the available supply capacity. Useful for households with multiple Teslas or for small holiday-let estates with shared MPAN.

Yes — IP55 outdoor rating is suitable for coastal installs including direct sea-facing locations. Combine with stainless steel A4 fixings and proper cable gland sealing. The unit's enclosed design and lack of physical buttons reduces salt-corrosion failure points compared to some competitors.

Most Tesla Wall Connector installs are completed in a single day, 3-5 hours on site. Lead time from quote to install is typically 1-2 weeks in Cornwall. DNO G99 notification for 22kW three-phase installs may add 2-4 weeks.

Need Tesla Wall Connector installation? Let's Get You Sorted.

Compare your options, or ask us to introduce you to a local installer.

See Your Options
Find an Installer Email Us